Monday, March 26, 2012

Your Monday Maintenance Tip: Interior Cleaning Tips

Mmt_interior_cleaning_tips
#1: Refer to the owner's manual before attempting to clean the interior of your vehicle. I've found that many of today's auto components are very sensitive to cleaners. Before you start, test each of the interior materials in small, out-of-the-way locations, where consequences won't be too terrible if it doesn't work out. It's better to be safe than sorry. Do you want to look at the spray pattern from a can of Super Duper Quikkie-Kleen for the rest of the life of your car?

#2: Don't vacuum hard to reach places - instead, blow it out by connecting your vacuum hose to the vacuum outlet. It is most effective to rapidly toggle the power switch on your vacuum between "on" and "off." Here's why. If you blow the debris out at full speed, it's going to fly all over the vehicle. Doing it at a reduced power, however, will move the debris just far enough so you can access it, then easily vacuum it up.

#3: Get a paint brush and a toothbrush. These are the two best tools for accessing hard-to-reach cracks, crevices and corners. The paint brush is great for reaching into deep locations. Vacuum with one hand as you brush those hard-to-reach locations, and you'll quickly clean up tricky spots. Leave both brushes in your glove compartment, so you'll have them when you stop by your local car wash and vacuum emporium.

#4: To thoroughly remove debris from carpets and mats, use a sturdy brush and run a vacuum right behind it. Don't get too aggressive with the brush. Mats and carpets are (sadly) poorly made these days, even on high-end vehicles. You can easily cause fraying or other damage by using too much force.

#5: For gum, wax and other materials use chewing gum remover. It actually freezes the gum, so that it can easily be scraped off. Use a dull paint scraper to remove the gum once it's frozen. If you can't find chewing gum remover, you can also use dry ice. Get the gum cold enough so it will crack when you apply light pressure with the scraper.

Chewing gum remover may not be available at your local automotive parts and accessories store. You may have to purchase it through an auto-detailing company or a janitorial supply company.

#6: Skip the ArmorAll on the interior. I find it actually attracts dust. If you do use it, buff it in with a moist rag.

#7: Be very cautious cleaning the transparent plastic on your vehicle's instrument cluster. A lot of these plastics are extremely soft, and will scratch easily. I use Plexus plastic cleaner.

#8: The dirtiest spots in a car's interior are the locations you touch, meaning the steering wheel, seat belt, the shifting knob and the driver's side door panel. The "V" between your legs, where your Egg McMuffin and coffee winds up, can also be very dirty. Locate these components and plan to spend a few extra minutes cleaning them.

#9: When you're cleaning seat belts, only use a diluted, mild laundry soap. This will protect the integrity of the belt fabric.

#10: Windows should be cleaned inside and out with glass cleaner and paper towels. Then, lightly buff the windows with a 100% cotton towel.

#11: The dashboard and vehicle panels should be wiped with a dampened cloth with water. To remove grime, use an all-purpose cleaner, diluted with water. As always, use the mildest soap possible.

#12: Need to get rid of smells? Vinegar works very well, and it's a whole lot cheaper than commercial products. Start with a 20:1 water-to-vinegar concentration, and scrub thoroughly. If that doesn't work, slowly increase the ratio until you have success.

#13: No matter what you're doing to your car, be gentle. Because of manufacturers' interest in saving a buck, and the desire to increase the EPA fuel economy, a lot of manufacturers are using less durable materials. So, whether you're working on the inside or the outside, be gentle, or you may permanently mar or damage your vehicle.

 

Courtesy of Car Talk

No comments:

Post a Comment